Magenta MultiView II T4 User's Guide download pdf (Page 15)

Installation

MultiView™ II T4 Installation and User Guide 10

4.3.4 Config Mode-1: Sync-mode Options

The T4 is factory-configured for auto-detecting the proper sync-mode (RepliSync-I normal/stretched). This mode

is generally compatible with all existing MultiView™ receiver products that support RepliSync (if they are also

using their factory-default settings). However, some video sources may require a custom sync-mode setting

(most especially at 1080p and 1920x1200 video resolutions). For these cases, one of the other available sync-

modes can be selected.

Note that any connected MultiView™ receiver should generally be set to the same sync-mode and may require

other configuration adjustments (such as sync-polarity). Otherwise, you may not get a proper video display

output at that receiver.



(starting in normal-mode) Press and release the

CFG button once to access configuration mode-

1. CFG indicator = on.



Press and release the SEL button once. You

will now be able to change sync-mode settings.



LED indicators 1-3 should be illuminated (either

DIM or ON); all others (indicators 4-8) should be

off.



Press the CFG button repeatedly to step

through the available sync-mode settings as

shown below.



To leave configuration-mode step through all the

options OR leave the buttons untouched for 10

seconds.

4.3.5 Config Mode-1: 4

Pair Settings

The T4 provides several options for using the 4

-pair signals (pairs 1-3 are generally used for video). Note that

any connected MultiView™ receiver must be configured with a matching 4

-pair operating mode. Otherwise, the

desired 4

-pair signal will not work as expected.



(starting in normal-mode) Press and release the

CFG button once to access configuration-mode-1.

CFG indicator = on.



Press and release the SEL button twice. You will

now be able to change 4

-pair option settings.



LED indicators 4-6 should be illuminated (either

DIM or ON); all others (indicators 1-3, 7 and 8)

should be off.



Press the CFG button repeatedly to step through

the available 4

-pair settings as shown below.



To leave configuration-mode step through all the

options OR leave the buttons untouched for 10

seconds.

Note: If the “set factory defaults” procedure is used, the 4

-pair settings will be set to the T4-A version. This

happens regardless of what P/N appears on the bottom of the T4 (see bottom of T4 enclosure for the product-ID

label). To select the T4-S version, you will need to change the 4

-pair setting accordingly, as detailed above.

LED1 LED2 LED3 Front Panel View Sync-mode Setting

dim dim dim

The T4 will auto-detect the

required RepliSync-I mode

(“normal” or “stretched”). This is

the factory-default setting.

dim dim ON

Force RepliSync-I normal Horizontal

sync. pulse encoding.

dim ON dim

Force RepliSync-I “stretched”

Horizontal sync. pulse encoding.

dim ON ON Force RepliSync-II.

ON dim dim

Force fixed-sync mode. NOTE: A

connected MultiView receiver must

also be in fixed-sync mode and with

H/V polarities selected at the

receiver.

LED4 LED5 LED6

Front Panel View

pair Operating Mode

dim dim dim

-pair signals are disabled. This

effectively “mutes” anything being

sent on the 4

pair. This can be

useful for diagnostic purposes.

dim dim ON

Direct pass-through of 4

-pair wires

(custom applications).

dim ON dim

External analog (L+R summed)

audio.

This is the factory-default mode,

which represents a T4-A version.

dim ON ON

External S/PDIF digital audio. Input-

impedance = 75-ohms.

ON dim dim

Simplex-serial.

This is the factory-delivered mode

for the T4-S version.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 26 27

Comments to this Manuals

No comments

Magenta MultiView II T4 User's Guide Page 15

Comments to this Manuals

Related products and manuals for AV extenders Magenta MultiView II T4